home 고객문의 애누리요청 자유결재 장바구니 주문/배송조회 마이페이지 무선모형 RC 부품 프라모델 건담/애니/SF 목재/철도모형 모델링공구/용품 서바이벌 미니카 과학교재 완구/카드/게임 카달로그/서적


    - RC 자동차

    - RC 보트/요트/잠수함

    - RC 로봇/탱크/오토바이

    - 드론(멀티콥터)/헬기/비행기

    - 기타 무선모형/완구


    - 조종기/수신기/서보 관련

    - 모터/변속기 관련

    - 충전기/방전기/서플라이

    - 배터리/BEC/스트랩

    - 전선/커넥터/스위치

    - 전동용 피니언/스퍼 기어


    - 엔진/머플러/플러그 관련

    - 연료/튜브/시동장비 관련


    - 바디/스티커/도료 관련

    - 휠/타이어 관련

    - LED 라이트/악세서리


    - 스크류/너트/와셔/심/링

    - 베어링/볼엔드/턴버클/디프볼

    - 오일/그리스/접착제/케미컬


    - 공구/셋업/게이지 관련

    - 보관용 가방/박스/케이스

    - 시뮬레이터/의류/악세사리


아카데미 제품 모음 올드 제품 특가 MUGEN 파트 모음 MUGEN 제품 모음 HPI 제품 모음 SERPENT 제품 모음 HITEC 제품 모음 O.S ENGINE 제품 모음 TRAXXAS 제품 모음 SWEEP RACING 제품 모음 AXIAL 제품 모음 Muchmore 제품 모음 MINI-Z 제품 모음
비밀번호 확인 닫기
현재위치 : Home > A_RC 자동차 > 엔진 퓨어 > SERPENT > [SER903018] Viper 989 1/8 GP
[SER903018] Viper 989 1/8 GP
제조회사 : SERPENT
모델명 : SER903018
소비자가 : 1,020,000
판매가격 : 1,020,000원
총 상품 금액 0

[LOS03027T1] LOSI 1/10 Tenacity DB Pro 4WD Desert Buggy Brushless RTR with Smart, Lucas Oil

[LOS03027T2] LOSI 1/10 Tenacity DB Pro 4WD Desert Buggy Brushless RTR with Smart, Fox Racing

[532184R] FXX 2.0 KMW 2WD 1/10 Drift Car ARR LIMITED (Red)

[532184S] FXX 2.0 KMW 2WD 1/10 Drift Car ARR LIMITED (Silver)


[A800FXC] AWESOMATIX "A800FX" 1:10 FWD PREMIUM Touring Car
상품 상세 설명


- Website
- Promopage
- Facebook page
- Viper 989 Facebook user group
- Serpent Advanced user Manuals pages
- YouTube video’s
- Online set-up sheets
- Support from distributors, dealers and team drivers worldwide

A nice selection of shirts, sweaters, jackets, caps, bags, tools and decals.

Serpent Viper 989. Designed by Michael Salven.
With great help from all team-drivers and 988 drivers!

General features

7075 T6 Aluminium 5mm chassis plate
The 5mm aluminium chassis has perfect symmetrical shape for even flex and weight distribution. The ultra-narrow chassis is very light, while it still remains strong in critical places.  The Viper 989 logo is laser engraved.

Other main specs

- 4wd belt-driven race car
- Serpent spring steel axles with quick change system for the wheels
- Front and rear spring steel cvd shafts
- NSK bearings for the transmission
- Low friction belts and ball raced belt-tensioner
- Black anodized front shaft with one-way bearings and narrow rear solid axle
- super low inertia 2-speed gearbox
- Independent suspension with hydraulic low-friction shock absorbers
- Ball raced front and rear anti-roll bars

In this way it is possible to change heave adjustments more or less independent of roll adjustments.
As an example it is possible to have a very light roll damping combined with a very high heave damping, something which is not possible with a classic suspension.
The third damper can be used to only alter the damping characteristics without a third spring, but also to add a spring to alter spring rates for heave
The front and rear heave sets are available as an option.

As an option the 989 offers a heave-damper setup in the front as well as the rear.

On top of that we payed a lot of attention to the bottom seal. 2 X-rings and a long bushing provide that extra bit of low-friction sealing that keeps the oil inside and the dirt outside

The piston is fixed onto the shaft with a nut. No clipses or shims.

New improved shockabsorbers for the ultimate grip

The single most important new feature are probably the shock-absorbers. A lot of attention has been payed to minimize friction and jamming.
Testing has also shown that a slightly smaller bore works better.
On the rear of the car we also increased the total length for extra stroke and better progressivity

New shaped radioplate. This shape has been found to provide the best flex characteristics

New way of mounting of the servosaver. If the radioplate is not mounted, the servosaver still stays in place

New mounted rear chassis stiffener to allow for easier removal of the radioplate

The newly developed front bumper is a very light and easy to use design.
The strong aluminium front body posts are eccentric, to allow movement of the body a few mm forward and backwards to optimize steering and downforce.

The steering blocks, which are equal left and right, offer a system to change the axle position to a “trailing” or “leading” position, and the ability to change the kingpin-inclination and offset. This allows multiple options to fine tune steering balance in all phases of the corner. The steering block features an aluminium plate to connect the spring steel track-rods. They have 2 Ackermann options.
Optional carbon fibre disks can be mounted on the side of the steering blocks and uprights for aerodynamic adjustments.

The long durable front lower wishbones are in a new hollow type design with closed bottom for improved aerodynamics and have separate top mounted moulded inserts. An aluminium shock mount plate is screwed onto the lower wishbone. This allows the shock attachment point to be placed further outwards improving shock motion. The front lower arms are mounted to the front brackets with nylon holders. The kit includes 2 versions: in and out. This system also enables quick and easy front drive shaft maintenance.

The rear floating body mount which is mounted on the up-rights with 2 arms is centred by a carbon-fibre and steel guider. The mount has 4 positions on each side to choose from, depending on body shell used and traction available. The threaded holes on the end of the body mount give the option to add further body-supports.

The durable composite uprights hold the ball raced wheel axles, with aluminium quick-change levers. On top of the up-right spacers can be added under the pivot ball to change roll centre and camber change.
Optional carbon fibre disks can be mounted on the side of the uprights for aerodynamic reasons. The rear uprights are connected to the arms with spring steel 8.5mm pivot balls, which run very smooth and well protected in nylon cups, and are easy to adjust with a 2.5 hex tool.
The adjustable rear upper camber links mount to a 4 position rear carbon fibre camber plate.

The new rear lower wishbones have a hollow style design with closed bottoms for aerodynamics and separate top mounted moulded plates. The lower rear arms hold the link for the rear anti-roll bar and the alu mounting plate of the rear shocks. This plate moves the shock mounting position to the outside for improved geometry. Nylon clips are used on the lower rear pins to change wheelbase.

The narrow solid rear axle in Serpent spring steel has a lightweight 9mm wide 48T pulley. The axle has a double slot for the driveshaft pin for lightness and long life. Spring steel, CVD type, drive shafts connect the rear shaft to spring steel wheel-axles with aluminium quick-change levers. A very durable and long lasting drivetrain.

The wire type rear anti-roll bar is ball raced. It is mounted in the rear bearing blocks and is easy to change and adjust. The standard wire is 2.5mm and 2 optional thicknesses are available. The pivot ball link system directs the suspension movement to the bar and allows easy tweak adjustment.

The rear end construction with aluminium brackets is a very open design, which allows for easy of maintenance and cleaning. Dis-assembly requires the removal of only a few screws. Replacing a belt if needed, is a simple task. The eccentric bearing holders on the rear shaft allow adjustment of belt tension. The whole rear end can be removed as one unit from the chassis by removal of only a few screws.

The central mounted seervosaver allows easy and fast Ackermann adjustment. The servosaver features a top mounted insert which can be used in 3 positions. Another 2 Ackermann positions are available on the steering blocks.

The black anodized aluminium front axle has Japan made one-way bearings. Spring steel drive cups connect to the long and thin spring-steel drive shafts with CVD system. The ball raced spring steel wheel axles have aluminium quick-change levers. The open front end design allows for very fast and easy removal of the front axle and driveline parts.

The wire type front anti-roll bar is ball raced. It is easy to change and adjust due to the open front end design. The standard wire is 2.5mm and 2 optional thicknesses are available. The pivot ball link system directs the suspension movement to the bar and allows easy tweak adjustment.
The steering blocks are connected to the arms with spring steel 8.5mm pivot balls, which run very smooth and well protected in nylon cups, and are easy to adjust with a 2.5 hex tool.

The left and right interchangeable upper arms are mounted with 3 position nylon suspension pin inserts.  The 3 position inserts allow camber-change adjustments and are held in place by the anodized aluminium top brackets. Below the top brackets, spacers can be used to change their angle or height. Caster is adjusted with clips on the upper pivot pins. The same clips are also used on the lower pivot pins to change wheelbase.

No inserts anymore to keep it simple. Excessive testing of different shapes lead us to this design to have the best balance of front end grip on high as well as low speed and hairpins

New superlight, one-piece bumper for improved aerodynamics.

A new shorter internal gear ratio of 2.4 helps acceleration and increases the active range of the overall gear ratio. Using 19/24 now is almost like 18/23 on the 988.

Also the overdrive has changed slightly to have the perfect rear/front drive balance with ENS and EFRA hand out tires

The brake now features a 2.5mm thick disc with improved ventilation and braking stability

The pulley adapter is a much lighter construction for better inertia and improved acceleration

Their shape now allows the removal of the rear solid axle without removal of the 2-speed shaft and belt

The bulkheads are machined excessively to get the perfect balance between weight and strength

The rear bulkheads are now also connected to the rearplate to improve the stiffness as well as reduce vibrations.

The one-piece plastic radiomount is replaced by a 2-piece aluminium construction. It is lighter than the plastic one, and at the same time it improves the flex characteristics and the accuracy of mounting the radioplate.

We also have added 2 more locations for another weight, one underneath the engine and another one underneath the servosaver.

The central weight bridge allows the use of max 3 weights

All weights are mounted as low as possible to improve the center of gravitiy  

We kept the possibility to have a weight in the very bottom which is easily adjustable in it’s position.
At the same time we improved the way it is it mounted to reduce vibrations by using a carbon weight bridge which is mounted in anti-vibration rubbers.

NEW key features

Ultra-narrow chassis with improved flex characteristics. The chassis is milled down in less load-stressed areas to make it as light as possible and still remain stiff in areas where needed.

As the inventor of the Centax clutch, the 2-speed gearbox and many other things that are now industry standard, we also integrated some new solutions on the suspension.

Another major point of development was to reduce weight, reduction of vibrations and ease of set-up and maintenance.

New side belt tensioners improve clearance with the engine manifold.
It also reduces vibrations on the sidebelt.

Adjustment is easily done on the midshaft

The new super-light midshaft assembly also acts as adjustable belt tensioner as well as pipe wire holder

The volume of the tank is 125cc and needs to be adjusted by the user to perfect volume inside the rules by using inserts

The new tank seal keeps a higher pressure and keep things dry and clean
The cap of the tank is higher to allow even faster refueling.

The new tank is more consistent in adjustment no matter if it’s full or almost empty.

New shaped fueltank mounted on top of the radioplate.

2nd gear adapter is locked in position to avoid binding and deliver constant performance of engine and gearbox

Easy access for adjustment from the outside

2 bearings in the second gear “bell” for better truth of rotation and balance

M4 setscrews for gap adjustment to help keeping the gap constant

A much longer ramp for the roller avoiding locking of the second gear even with excessive wear on the shoes

The completely new gearbox has less inertia than the one from the 988. This improves acceleration.

Despite being lighter it offers new features to improve reliability and consistanty

The Serpent Viper 989 is the latest development of Serpent on the 1/8 gas market.
Serpent has been the driving force for decades and the Viper 989 is the latest interpretation of a high performance race car based on that experience, combined with the latest insights on weight, weight distribution and flex.

* 배송은 로젠 택배를 통해 이루어 집니다.
* 주문하신 상품의 총 합계 금액이 6만원 이상일 경우에는 무료 배송해 드립니다.(제주도 등 도서지역 제외)
*구매금액에 따라 차등 택배비 부여 (공지사항참조)
* 제주도 등 도서지역의 경우에는 도선료(또는 항공임)가 별도로 추가됩니다.
* 부품 등 일부 품목은 품절로 인해 배송이 어려울 수 있으니 양해해 주시기 바랍니다.
* 주문하신 상품이 품절로 수급이 어려울 경우 바로 연락드리고 환불해 드립니다
1. 고객님께서 취소하신 상품에 대한 환불은 현금의 경우 반품 확인 후 고객님이 요청하신 통장으로 입금하여 드립니다.
2. 신용카드로 결제하신 경우 신용카드의 거래승인을 취소하여 드립니다.
3. 반품을 하시는 경우 구입하신 상품과 행사제품을 함께 보내시거나, 행사제품에 대해 해당되는 일정금액을 부담하셔야 합니다.
* 상품수령 후 7일 이내에 반품및 A/S가능
* 제품의 하자 및 주문내역과 다른 상품이 배송된 경우 반품 및 교환 배송요금은 판매자가 부담.
* 고객 변심으로 인한 반품 및 교환시에는 배송비를 부담하셔야 합니다
상품 성격상 사용 여부의 확인이 불가능한 제품(도료, 에어브러쉬, 컴프레셔, 서적류 등)은 교환 및 환불이 불가능합니다.
* 조립 제품으로 조립을 시작한 경우나 밀폐된 포장을 개봉한 경우,또는 상품 가치가 상실된 경우에는 상품불량 이라도 반품 및 교환이 불가하니 조립 또는 개봉전 반드시 확인 하시기 바랍니다.
1. 상품의 불량에 의한 반품, 교환, A/S, 환불, 품질보증 및 피해보상 등에 관한 사항은 소비자분쟁해결기준(공정거래위원회 고시)에 따라 받으실 수 있습니다.
2. 대금 환불 및 환불 지연에 따른 배상금 지급 조건, 절차 등은 전자상거래 등에서의 소비자 보호에 관한 법률에 따라 처리합니다.
보고계신 상품에 대해 궁금한 점을 해결해 드립니다.
번호 제목 작성자 조회
이름 :
내용 :

회사소개이용약관개인정보 처리방침이용안내
상호명 : 알씨링크 ㅣ 대표자 : 류빛나 ㅣ 개인정보 보호 책임자 : 정재훈
사업자등록번호 : 214-08-43619 [사업자정보확인] ㅣ 통신판매업신고번호 : 2005-06199
사업장소재지 : 경기도 광주시 중앙로 330-20 302호
대표전화 : 010-3799-4253 ㅣ Fax : 010-3799-4253
Copyright ⓒ 알씨링크All Rights Reserved.