home 고객문의 애누리요청 자유결재 장바구니 주문/배송조회 마이페이지 무선모형 RC 부품 프라모델 건담/애니/SF 목재/철도모형 모델링공구/용품 서바이벌 미니카 과학교재 완구/카드/게임 카달로그/서적
 
    

 

    - RC 자동차

    - RC 보트/요트/잠수함

    - RC 로봇/탱크/오토바이

    - 드론(멀티콥터)/헬기/비행기

    - 기타 무선모형/완구

 

    - 조종기/수신기/서보 관련

    - 모터/변속기 관련

    - 충전기/방전기/서플라이

    - 배터리/BEC/스트랩

    - 전선/커넥터/스위치

    - 전동용 피니언/스퍼 기어

 

    - 엔진/머플러/플러그 관련

    - 연료/튜브/시동장비 관련

 

    - 바디/스티커/도료 관련

    - 휠/타이어 관련

    - LED 라이트/악세서리

 

    - 스크류/너트/와셔/심/링

    - 베어링/볼엔드/턴버클/디프볼

    - 오일/그리스/접착제/케미컬

 

    - 공구/셋업/게이지 관련

    - 보관용 가방/박스/케이스

    - 시뮬레이터/의류/악세사리

 

아카데미 제품 모음 올드 제품 특가 MUGEN 파트 모음 MUGEN 제품 모음 HPI 제품 모음 SERPENT 제품 모음 HITEC 제품 모음 O.S ENGINE 제품 모음 TRAXXAS 제품 모음 SWEEP RACING 제품 모음 AXIAL 제품 모음 Muchmore 제품 모음 MINI-Z 제품 모음
고객센터안내
계좌안내
 
비밀번호 확인 닫기
현재위치 : Home > A_RC 자동차 > 전동 투어링 > SERPENT > [SER600058] Cobra SRX8 GTE 1/8 EP
[SER600058] Cobra SRX8 GTE 1/8 EP
 
제조회사 : SERPENT
모델명 : SER600058
소비자가 : 920,000
판매가격 : 920,000원
적립금액 : 1%
총 상품 금액 0

[SER600058] Cobra SRX8 GTE 1/8 EP
920,000원

[CB89076-4] Traxxas 1/10 MAXX (오렌지,레드,블루) 색상랜덤 - 인증번호: KCC-CRI-cnj-6513-4/MSIP-REI-H58-6533
760,000원

[E2026] Mugen Seiki 1/8 전동버기 MBX8 ECO 팀에디션
798,000원

[AAK40001] Team Associated CR12 Ford F-150 Truck RTR 1/12 4WD Rock Crawler (Black)
239,000원

[SER903018] Viper 989 1/8 GP
1,020,000원

[SER600045] Cobra GT RTR EP 1/8
860,000원
 
상품 상세 설명
 
 

 

The SRX8-GTe is an all new electric powered platform specifically designed for the 1/8th “GT” category. The car is based off the high level of performance experienced in the SRX8-GT and proven durability of the SRX8 line of cars. With Balance and speed in mind we opted for the saddle layout, which opened up many additional advantages in the design and performance on the track. Additionally speaking, the SRX8-GTe benefits from a vast assortment of high performance options already available for SRX8 line of vehicles. This new model racing car is no different than many of our latest releases; we innovate at every opportunity and push the industry to new heights. With the highest quality materials, our plastics and metals simply can’t be beat. Our designs can be copied, but our quality can’t!!!!



> Description

When it comes to road course racing, chassis width and corner clearance is huge, this controls the lean and body roll in all directions. In addition to that, the roll and lean angles ultimately control the maximum cornering force. We kept the chassis the narrowest in nature that was possible, while increasing the corner clearance. However, we took it another step further. We pioneered the front of the chassis to adhere to the ROAR and IFMAR rules of a minimum kick-up angle, while increases clearance, for curbs, uneven track and under heavy braking. This also allows for a nice mounting surface and easy to find body posts as they will be facing fully vertical. All these great design concepts are nicely nestled in a 7075-t6 aluminum alloy chassis. This chassis will take the abuse and stand the test of time.


Both the front and rear suspension will get the same treatment. The sway bar will be securely fastened and the left and right play can be adjusted. You can be rest assured there is not un-necessary friction and your roll bar is fully operation when driving your race car.


In addition to the ball raced roll bars. The arms have a captured pivot-ball for the sway bar. This design allows you to adjust the play of the ball as well as make sure you have no binding in any direction when your suspension operates. The plastic nut, keeps the ball retained into position. You can replace the plastic cap with an aluminum optional version if you like a more secure nut.


Carried over from our successful SRX8 is the C-hub front end and long rear arm. The rear arm offers 2 length arms, short and long. Aside from the arm length, we have gone another step further and refined the suspension geometry for maximum cornering. Through countless hours of testing, the new arm risers both on the front and rear compliment this GT to a whole new level of performance. If that is not enough you can outfit the top and bottom of the arms with nylon or carbon arm stiffeners to control the flex characteristics.


The shock towers have all been optimized to give you the proper up and down travel for the most demanding Racing circuits out there.


The front and rear suspension arms, both feature arm plates that can be added, removed or swapped out for Carbon fiber. This feature can be used for a host of reasons, which can include looks and or performance.


Depending on your grip level and track surface, you can adjust the stiffness of the SRX8-GTe’s arms. Generally stiffer arms have a more linear feel but can reduce grip. This happens by forcing the shock to do more work.


A softer arm can increase grip by reducing the shocks importance, but can also give the car a less direct feeling. All of these adjustments can have a huge impact on your lap time and results.


The Rear uprights come fully machined from 7075-T6 aluminum. We anodized them black and then dolled them up a bit with some nice machined silver edges. Aside from their stunning appearance, they also have Rubber CVD boots to keep the grease contained. This minimizes wear and maximizes your cars life. In addition to, the Roll center can be adjusted in 4 positions for the short arm and also 4 positions in the long arm. On a day when you are feeling bored at the track, give some of these adjustments a try, we think you will be impressed with how much more speed you can find.


The front Caster blocks have been tested rigorously. We settled on 10 degrees, as it seemed to produce the best lap times. Aside from the angle, they are fully machined from 7075-T6 aluminum and also have nice machined silver edges.  They also have setscrews that hold all pins into position, ensuring you will finish every single race you start. They also have steering stop screws that can be used to limit the steering throw to the absolute perfect of angles.    


The Front steering spindle, made from 7075-T6 is black anodized with silver machined edges. This part is a carryover part from the SRX8. It also includes a rubber CVD boot to keep the driveshaft greased, to minimize wear.


The steering spindle also accepts 5 different Ackermann plates. 0,1,2,3,4. Generally 0 is the easiest steering while 4 is more aggressive. You can fine tune your GT’s steering to fit your driving needs. All plates can be easily identified by the notch marks in the side of the plate.


16mm threaded shocks with o ring seals. Carried over from our previous GT, these foolproof shocks have never let us down. They have extremely tough 4mm shock shafts and aluminum shock caps. The threaded bodies make it super easy to get the ride height or tweak settings you might be looking for. The shock can be set up in a variety of ways depending on your configuration. With “Pro “caps available as optional you can have Emulsion or bladder shocks all in one cap.


The SRX8-GTe also comes with fully adjustable front and rear body mounts, and platforms. The platforms are oversized to make sure the body had plenty to rest on and held in place with a sold metal pin.


The posts themselves are extra-long so that they can be cut to length depending on what body you prefer and positioned with the use of a threaded screw.


A new addition to the SRX8-GT is the Rear Diffuser. Testing showed amazing results with this part. More stability, ease of driving, better air flow in and out of the body and faster lap times.


Finally, we get to the front bumper. We supply an oversized large foam bumper in the kit.  The bumper is firmly mounted between the upper and lower bumper. This solid mounting allows you to take more direct impact and ensure your car will be properly protected. The bumper can be trimmed to fit most if not all bodies currently in the market


If you have a good thing, let’s keep it going... That is exactly what we did with the ball bearing raced sway bars. We introduced this first the 1.8thoffroad and then followed that up into our GT line of cars.


The ring gear is 44t, while the pinion is 13t, giving you the optimal gearing for the GT class.  The internal Ratio of the differential is 2:1 which is industry standard.


As mentioned above there are some new adjustments, but some old ones as well. The 7075-T6 brackets also allow you to fully adjust the front kick-up 0,0.5,1,1.5 and 2 degree increments.


The rear anti-squat is no different as you can adjust that from 1,1.5,2,2.5,3 degrees, and the Toe-in adjustment can be made, 2,2.5,2.75,3,3.25,3.5 and 4 degrees using the inserts provided in the kit.


Not only can you adjust the toe, anti-squat and kick angle, why not throw in Roll Center height adjustments as well. We spare no expense when it comes to performance and this SRX8-GTe is no exception. We have also added new RC shims to adjust the roll center at 1 and 2 mm off the chassis plate.


This allows you to fine tune your kick angle, anti-squat and Roll center height further than ever before. We understand winning is an addiction and to be honest, with all these features, nothing will stand in your way.


A carry over from our Nitro on road heritage, the GT program was upgraded with fully aluminum bulkheads and suspension brackets, additionally the SRX8-E Center diff mount, Motor Mount and motor mount slide. All these components are included in the kit and made from 7075-T6.


They are black anodized with Silver shiny edges, how stylish is that? The looks are 2nd to no other brand, even if other companies have jumped on the band wagon, you can  be proud you purchased the original trend setting style.


The next few items are sure to blow away the competition and to further establish the Serpent brand as an innovator. The SRX8-GT will be the first to come with not only 4 adjustable diff positions, but it will also come with easy access differentials.


The 4 adjustment positions will allow the racer to fine to his model race car from the lowest grip, all the way to the highest grip conditions. Both the front and rear bulkheads share the same Diff inserts, and pinion holders, to minimize extra parts and to maximize your racing fun. The differentials both front and rear can be removed and replaced in a matter of seconds. This gives you no reason not to freshen them up, fine tune or rebuild your differential.


To deliver the power to the ground the center differential was removed and replaced with a super light weight spool. Whether you are on a high grip track and need maximum acceleration, or want to do some sick drifting in the street, we are sure you will really enjoy this upgrade.


The spool adapts the SRX8-E’s 44 tooth Module 1 spur gear, so it will accept all popular brands of pinion gears.


A new addition to the SRX8-GTe is a flat steering system. Since minimal kick-up angles are used there was no need to have the angled steering system seen on our Off-road cars. We took the successful steering system from our SRX8 and SRX8e and created a version specifically for our GT cars. Not only did it allow us to continue to use our existing Ackerman plates, but it also allowed us to lower the CG of the bulkheads and further enhance this cars ability to corner with less body roll. Keeping the most consistent Ackermann curves helps to ensure you are getting exactly what you expect with no surprises, when you approach a turn, travel through and then exit. The end outcome is more efficient cornering with less tire wear.


In order to fully utilize our steering system and make sure this model does exactly as you command. The steering servo is mounted to a beautifully crafted 1 piece servo mount made from 7075-t6 aluminum.  That mount then is directly mounted to the chassis to create the most solid foundation a servo could ask for. If precision is something you want in your RC model, look no further, this SRX8-GTe is for you.


At the front and rear of this Asphalt slaying machine we took some pride in trying to have as symmetrical flex possible. In testing it was shown to have a positive effect on lap times as well as handling left and right into a corner. This SRX8-GTe utilizes a top deck that is mounted directly to the center bulkhead as well as the rear bulkheads. The chassis uses the twist of the top deck mounted in the center of the chassis to control the twist of the chassis while still providing super stiffness front to back. With Controllable twist, you can generate more cornering force, while still having the front to back stiffness; you can further enhance the grip out of the corners. Don’t be afraid to crack open the throttle out of the corners or push harder than ever before in the corners. This baby will take all you can give it.


When Center of Gravity (CG) and weight distribution have huge effects on how an RC car will perform, why not maximize it. In the GT class where you race on high grip asphalt and the cars ability to corner depends on how well it can utilize the tires. We simply say…” lower is better”, generally speaking the higher the grip the bigger the advantage of low CG.  This SRX8-GTe has the batteries mounted directly on the chassis; it can’t get better than that. The batteries are secured in place by plastic mounts and then fixed into position with Velcro straps. Just remember, race cars are built for performance, not luxury.


The SRX8-GT chassis comes equipped with holes pre drilled into the chassis for optional weights. At Serpent we understand the need for being able to adjust the weight distribution of your racing machine. This GT will be no exception as you can add a 25-gram weight to the front and/or rear. The weights will be sold separately but the chassis is ready to accept them.


The front and rear gear differentials are fully sealed, adjustable and light weight. The differentials viscous nature can be adjusted to each track condition by changing the viscosity of the silicone oil used to fill it.


Being involved with the Gt category from almost the beginning, Serpent has understood the direction and path necessary to produce a race winning car. The SRX8-GTe was a collaborated effort of many individuals dedicated to the Serpent Brand. Working tirelessly on new concepts, suspension geometry, product assembly and durability, our team was able to create an absolute monster of a product. The SRX8-GTe has innovations at virtually every corner, while being one of the easiest cars we have ever produced to work on. Here at Serpent we are extremely proud of the SRX8-GTe and have taken great pride in the design, from top to bottom. We didn’t just want to make a new car, we wanted to make a new car that simply changed the game.  If you’re looking for sheer performance and quality in one product, look no further the SRX8-GTe is the one for you, this product is simply rivaled by no-one.

 
 
 
* 배송은 로젠 택배를 통해 이루어 집니다.
* 주문하신 상품의 총 합계 금액이 6만원 이상일 경우에는 무료 배송해 드립니다.(제주도 등 도서지역 제외)
*구매금액에 따라 차등 택배비 부여 (공지사항참조)
* 제주도 등 도서지역의 경우에는 도선료(또는 항공임)가 별도로 추가됩니다.
* 부품 등 일부 품목은 품절로 인해 배송이 어려울 수 있으니 양해해 주시기 바랍니다.
* 주문하신 상품이 품절로 수급이 어려울 경우 바로 연락드리고 환불해 드립니다
1. 고객님께서 취소하신 상품에 대한 환불은 현금의 경우 반품 확인 후 고객님이 요청하신 통장으로 입금하여 드립니다.
2. 신용카드로 결제하신 경우 신용카드의 거래승인을 취소하여 드립니다.
3. 반품을 하시는 경우 구입하신 상품과 행사제품을 함께 보내시거나, 행사제품에 대해 해당되는 일정금액을 부담하셔야 합니다.
* 상품수령 후 7일 이내에 반품및 A/S가능
* 제품의 하자 및 주문내역과 다른 상품이 배송된 경우 반품 및 교환 배송요금은 판매자가 부담.
* 고객 변심으로 인한 반품 및 교환시에는 배송비를 부담하셔야 합니다
상품 성격상 사용 여부의 확인이 불가능한 제품(도료, 에어브러쉬, 컴프레셔, 서적류 등)은 교환 및 환불이 불가능합니다.
* 조립 제품으로 조립을 시작한 경우나 밀폐된 포장을 개봉한 경우,또는 상품 가치가 상실된 경우에는 상품불량 이라도 반품 및 교환이 불가하니 조립 또는 개봉전 반드시 확인 하시기 바랍니다.
1. 상품의 불량에 의한 반품, 교환, A/S, 환불, 품질보증 및 피해보상 등에 관한 사항은 소비자분쟁해결기준(공정거래위원회 고시)에 따라 받으실 수 있습니다.
2. 대금 환불 및 환불 지연에 따른 배상금 지급 조건, 절차 등은 전자상거래 등에서의 소비자 보호에 관한 법률에 따라 처리합니다.
 
 
보고계신 상품에 대해 궁금한 점을 해결해 드립니다.
번호 제목 작성자 조회
 
 
 
 
 
이름 :
내용 :
평점
 
 
 


회사소개이용약관개인정보 처리방침이용안내
상호명 : 알씨링크 ㅣ 대표자 : 류빛나 ㅣ 개인정보 보호 책임자 : 정재훈
사업자등록번호 : 214-08-43619 [사업자정보확인] ㅣ 통신판매업신고번호 : 2005-06199
사업장소재지 : 경기도 광주시 중앙로 330-20 302호
대표전화 : 010-3799-4253 ㅣ Fax : 010-3799-4253
Copyright ⓒ 알씨링크All Rights Reserved.