home 고객문의 애누리요청 자유결재 장바구니 주문/배송조회 마이페이지 무선모형 RC 부품 프라모델 건담/애니/SF 목재/철도모형 모델링공구/용품 서바이벌 미니카 과학교재 완구/카드/게임 카달로그/서적
 
    

 

    - RC 자동차

    - RC 보트/요트/잠수함

    - RC 로봇/탱크/오토바이

    - 드론(멀티콥터)/헬기/비행기

    - 기타 무선모형/완구

 

    - 조종기/수신기/서보 관련

    - 모터/변속기 관련

    - 충전기/방전기/서플라이

    - 배터리/BEC/스트랩

    - 전선/커넥터/스위치

    - 전동용 피니언/스퍼 기어

 

    - 엔진/머플러/플러그 관련

    - 연료/튜브/시동장비 관련

 

    - 바디/스티커/도료 관련

    - 휠/타이어 관련

    - LED 라이트/악세서리

 

    - 스크류/너트/와셔/심/링

    - 베어링/볼엔드/턴버클/디프볼

    - 오일/그리스/접착제/케미컬

 

    - 공구/셋업/게이지 관련

    - 보관용 가방/박스/케이스

    - 시뮬레이터/의류/악세사리

 

아카데미 제품 모음 올드 제품 특가 MUGEN 파트 모음 MUGEN 제품 모음 HPI 제품 모음 SERPENT 제품 모음 HITEC 제품 모음 O.S ENGINE 제품 모음 TRAXXAS 제품 모음 SWEEP RACING 제품 모음 AXIAL 제품 모음 Muchmore 제품 모음 MINI-Z 제품 모음
고객센터안내
계좌안내
 
비밀번호 확인 닫기
현재위치 : Home > A_RC 자동차 > 전동 투어링 > SERPENT > [SER600045] Cobra GT RTR EP 1/8
[SER600045] Cobra GT RTR EP 1/8
 
제조회사 : SERPENT
모델명 : SER600045
소비자가 : 860,000
판매가격 : 860,000원
적립금액 : 1%
총 상품 금액 0

[SER600058] Cobra SRX8 GTE 1/8 EP
920,000원

[KY30625B] 1/10 EP 2WD KIT Ultima
388,000원

[KY32324WR-B] MR03RWD r/s McLaren P1 GTR White/Red
218,000원

[KY32614WR-B] MA020AWD r/s SUBARU IMPREZA WRC 2008 Readyset
258,000원

[KY32615JK-B] MA-020AWD r/s Toyota CELICA No.7 WRC 1993 Juha Kankkunen Readyset
258,000원

[KY34256B] EP MT-4WD r/s PSYCHO KRUISER VE 2.0 readyset w/KT-231P+
798,000원
 
상품 상세 설명
 
 

 



Serpent has released Cobra GT in 1/8 R/C Models AWD drivetrain RTR (Ready-to-Run) under Electric Powered On-Road Touring Cars category

Cobra GT-E Ready To Race 1/8 Electric Powered The RTR version of the successful high end Serpent 1/8 Cobra GT . Complete with DragonRC 2.4 radio, metal-gear servo, brushless motor, waterproof speedo, prepainted-precut GT body with large rear wing and premounted GT tyres 4-wheel-drive, 3 geardiffs, 16mm bigbore shocks, aluminium shocktowers and chassis, easy radiobox, low batteryboxes. Fully upgradable with parts and options from the high end race-version. This super durable GT chassis allows a great entry in the racing scene, at a lower cost, and will make you finish your races !


Specifications:

  • Class: 1/8 scale 4wd GT -e Ready to race
  • Purpose: clublevel racing and parking lots
  • Suspension: fully independent
  • Drivetrain: cardan shafts, 3 gear diffs
  • Shocks: RCM shocks with membrane
  • Wheelbase: 328mm
  • Width: 305mm
  • Manual: full color RTR manual, speedo manual, radio manual
  • Decals: 2 sheets
  • Included: body, radio equipment, speedo, motor , tyres-wheels
  • Not included: batteries, charger, tools



Features:

  • race ready high performance electric GT 1/8
  • expert pre-assembled and pre-set
  • 4wd with cardanshafts, 3 compact ,durable geardiffs, super-easy machined aluminium motormount, superlow longitudinal batteryboxes, compact speedo-servo mount, unique angled steeringsystem, 16mm bigbore shocks, ballraced anti-roll bars FR and RR, 7075 T6 alu shocktower FR and RR, durable suspension and transmission parts, captured suspension pins, the works !!
  • Dragon-RC pistol type transmitter 2.4 GHz with large LCD screen
  • Dragon-RC 120A waterproof speedcontroller
  • Dragon-RC powerfull 2450kv brushless sensorless motor
  • Dragon-RC 10.5kg strong servo with metal gears
  • Dragon-RC high grip premounted GT racetyres and wheels
  • prepainted and precut ultra low GT bodyshell and large rear aero-wing
  • full color user manual and decal set included


Transmitter and receiver
The DragonRC pistol type transmitter comes with a nice large LCD screen, which makes is easy to select through the easy menus. The small and light receiver is fitted inside the radiobox of the car.

Speed-controller
The electronic speedcontroller is a fully Waterproof 120A unit from DragonRC with a small footprint which fits the Cobra like a glove. The new modern design is very small and attractive looking. Topquality soft silicone covered cables.

Brushless motor
The DragonRC brushless sensorless motor is a strong 2450kv unit which gives lots of torque and amazing topspeed. , and is anodised in same bronze color as the other alu parts of the car.

Chassisplate
Chassisplate in 3mm 7075 T6 aluminium. Kick-up angle on front for stable landings. Countersunk holes. Slots to locate the front and rear suspension mounts precisely. Angled sides to increase stiffness.

Bumper
Large foam bumper, which is kept in place by a upper and lower nylon bumperplate.

Chassis stiffeners
Composite stiffener front and rear, to give extra stiffness, but still allow some flex as needed.

Central radio / servo mount
Composite compact radiobox which offers good space for the steering servo and the receiver.

Battery-cases / side-guards
The main eyecatchers are the extremely low laydown longitudinal placed battery-packs at each side of the car, being part of the side-guards, securely fastened with a fliptop-lid, for easy and fast battery changes. The weight low in the car and in the right position, well balanced. The Lipo holders comply with ROAR legal packs / dimensions.

Motormount:
The motor is placed in the most optimal position in the car, keeping motor-forces and transmission parts / alignment in mind. Only one-screw is needed to secure the BL motor, in the nicely designed durable machined aluminium motormount. Space for additional motor-cooling available as needed.
The space for the motor allows a maximum motor-length of 70mm, which covers most widely used motors ( except for the truggy / monstertruck motors).

Steeringblocks assembly
Composite steeringblocks combined with 10 dgr C-hubs for precise steering. Spring steel wheel-axles with large size bearings and larger inner with precision threaded aluminum wheel-hubs with offset . Flanged wheel nuts to guarantee that you will not loose a wheel nut in a race.

Front suspension
Durable oversized lower suspension arms in strong composite nylon. On the lower side the special shaped downstops screws are mounted. The lower shock-mounting pins are secured with a small grubscrew from the bottom.

Front anti-roll bar
The ballraced front anti-roll bar system, consist of a spring steel bend wire, which is guided through the diff-cases and runs in ballraced steel adaptors. The wire is linked to the lower suspension arm, with a captured adjustable threaded pivotball, for very precise and low friction operation and easy tuning.

Shocktower and bodymounts front
4.0mm thick aluminium anodised shocktower with 2 upper positioning holes for the shocks and and 3 holes for roll-center positions. Strong, in height adjustable bodymounts with wide top-section to seat the body well.

Angled steering system / servo saver
The bell cranks are angled to reduce the angle of difference between the total caster and steering plane. Therefore you will have less bump steer and a truer steering Ackermann through the entire range of suspension

Ackermann plate
With the design of the steering bell cranks when changing the Ackermann you will not need to adjust your steering tie rods. You simply will only need to adjust your end points on your radio..

Rear suspension arms
Durable longer oversized lower suspension arms in strong composite nylon. On the lower side the special downstops screws are mounted. The lower shock-mounting pins are secured with a small grubscrew from the bottom.

Rear uprights assembly
Composite uprights with 3 upper roll-center positions. Strong steel track-rods with L/R threading and strong balljoints to pre-set camber. Hard steel wheel-axles with large size bearings and larger inner ones with precision threaded aluminum wheel-hubs with offset. Flanged wheel nuts to guarantee that you will not loose a wheel nut in a race.

Rear anti-roll bar
The ballraced front anti-roll bar system, consist of a spring steel bend wire, which is guided through the rear wingmount and runs in ballraced steel adaptors. The wire is linked to the lower suspension arm, with a captured adjustable threaded pivotball, for very precise and low friction operation.

Shocktower rear
4.5mm thick aluminium shocktower, integrated into the rear section for extra stiffness, with 2 upper positioning holes for the shocks and 3 holes for roll-center positions.

Wingmount and bodymounts rear
Polycarbonate rear low aero wing. Central rear bodymount with the rear bodypost, which are adjustable in height easily .

Captured pivot pins and balls and bolted hinge pins
All spring-steel hinge pins are either captured or bolted in place and made in spring-steel quality. This relieves stress on the hinge pin when adjusting the kick up, or anti squat. Your pin is free to rotate to any angle without binding.

Shockabsorbers RCM big-bore 16mm
Anodised aluminium shockbodies with durable 4mm shock-rods. Pre-load adjuster clips for ride height setting. Shocks use large diameter membranes and large diameter o-rings and bushings to create a supersmooth and leak-proof package. Large diameter pistons are held in place by a nut on the polished shock-rods tops. Open type spring retainer to let dirt out easy.

RCM shock springs
Colorcoded progressive race shock springs are supplied for the 1st standard set-up and all springs are grinded flat top and bottom, and checked individually for tension and length and are matched.

Compact geardifferentials
Very compact gear differentials with very smooth metal sintered gears, and steel shaft. Perfect sealing case with special gasket and o-rings. Very light and durable outdrive cups in spring-steel. Hardened spring-steel diff-coupler 13T with connector running in 2 oversized bearings The Cobra-GT-E uses a 13T / 44T combo gearing. 46T central diff gear. This drive ratio will provide amazing acceleration combined with the low vehicle weight.

Front and rear drive
The front has captured driveshafts using a CVD system. The rear has durable black steel driveshafts with hard steel pins.

Hard black steel transmission parts
The front and rear strong hard black steel cardan shafts connect the differentials .

Body
Serpent superlow Cobra GT body, fully pre-painted in a very attractive design and pre-cut too. The very low body has excellent handling and downforce
Tyres / wheels
The Cobra is fitted with premounted DragonRC GT racing tyres. The tyres are glued on durable but flexible DragonRC race-wheels with cell-foam inserts. A super-package for excellent grip on the most common surfaces.

Oils and grease
Top-quality silicone shock-oil, silicone diff oil and some grease is used to meet the standard set-up.




















 
 
 
* 배송은 로젠 택배를 통해 이루어 집니다.
* 주문하신 상품의 총 합계 금액이 6만원 이상일 경우에는 무료 배송해 드립니다.(제주도 등 도서지역 제외)
*구매금액에 따라 차등 택배비 부여 (공지사항참조)
* 제주도 등 도서지역의 경우에는 도선료(또는 항공임)가 별도로 추가됩니다.
* 부품 등 일부 품목은 품절로 인해 배송이 어려울 수 있으니 양해해 주시기 바랍니다.
* 주문하신 상품이 품절로 수급이 어려울 경우 바로 연락드리고 환불해 드립니다
1. 고객님께서 취소하신 상품에 대한 환불은 현금의 경우 반품 확인 후 고객님이 요청하신 통장으로 입금하여 드립니다.
2. 신용카드로 결제하신 경우 신용카드의 거래승인을 취소하여 드립니다.
3. 반품을 하시는 경우 구입하신 상품과 행사제품을 함께 보내시거나, 행사제품에 대해 해당되는 일정금액을 부담하셔야 합니다.
* 상품수령 후 7일 이내에 반품및 A/S가능
* 제품의 하자 및 주문내역과 다른 상품이 배송된 경우 반품 및 교환 배송요금은 판매자가 부담.
* 고객 변심으로 인한 반품 및 교환시에는 배송비를 부담하셔야 합니다
상품 성격상 사용 여부의 확인이 불가능한 제품(도료, 에어브러쉬, 컴프레셔, 서적류 등)은 교환 및 환불이 불가능합니다.
* 조립 제품으로 조립을 시작한 경우나 밀폐된 포장을 개봉한 경우,또는 상품 가치가 상실된 경우에는 상품불량 이라도 반품 및 교환이 불가하니 조립 또는 개봉전 반드시 확인 하시기 바랍니다.
1. 상품의 불량에 의한 반품, 교환, A/S, 환불, 품질보증 및 피해보상 등에 관한 사항은 소비자분쟁해결기준(공정거래위원회 고시)에 따라 받으실 수 있습니다.
2. 대금 환불 및 환불 지연에 따른 배상금 지급 조건, 절차 등은 전자상거래 등에서의 소비자 보호에 관한 법률에 따라 처리합니다.
 
 
보고계신 상품에 대해 궁금한 점을 해결해 드립니다.
번호 제목 작성자 조회
 
 
 
 
 
이름 :
내용 :
평점
 
 
 


회사소개이용약관개인정보 처리방침이용안내
상호명 : 알씨링크 ㅣ 대표자 : 류빛나 ㅣ 개인정보 보호 책임자 : 정재훈
사업자등록번호 : 214-08-43619 [사업자정보확인] ㅣ 통신판매업신고번호 : 2005-06199
사업장소재지 : 경기도 광주시 중앙로 330-20 302호
대표전화 : 010-3799-4253 ㅣ Fax : 010-3799-4253
Copyright ⓒ 알씨링크All Rights Reserved.